Serving the Pittsburgh area  ·  (412) 895-2157  ·  Open Mon-Sun 7am-7pm
📞 (412) 895-2157 Free Quote

Metal Roofing in Washington, PA (15301) · Local Professionals

Pittsburgh Metal Roofing · Fast response in Washington and the Pittsburgh area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+251Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Washington, PA sits just south of Pittsburgh where the brick row houses and farm-edge lots still carry old slate, tin, and shingle roofs that have seen a century of freeze-thaw cycles. From the historic homes near the Washington County Courthouse to the newer subdivisions off Route 19, homeowners here know that a roof has to handle lake-effect snow, ice dams, and summer storms without giving out.

We are Pittsburgh Metal Roofing, and we have been working on roofs across Washington and the surrounding areas for years. Whether you are in ZIP 15301 near Washington Park or out toward Meadowlands, we know the local building stock and the weather that beats on it. Call us at (412) 895-2157 for a free estimate.

Metal Roofing in Washington (15301)

Washington has a mix of housing that keeps us on our toes. Around the downtown historic district, you will find 1880s to 1920s brick and frame homes with steep slate gables and old tin roofs that are often at the end of their life. On the edges of town, farmhouses and ranches sit on larger lots with exposed-fastener metal roofs that have taken a beating from fallen limbs and hail. The ground here is clay and shale, which means drainage matters, and many lots have mature sugar maples and oaks that drop leaves and branches right onto the roof. We also see a lot of ice damming at the eaves on homes at higher elevations, especially after a heavy snow followed by a quick thaw.

Our team has replaced and repaired metal roofs on everything from Victorian homes near Washington & Jefferson College to commercial buildings along Jefferson Avenue. We understand how to work with the tight access on hillside properties and how to coordinate with local permit requirements. When we install a metal roof here, we build it to shed snow and ice, and we use fasteners and flashing that hold up to the constant freeze-thaw cycling that defines our region.

Our services in Washington

How a Job Works in Washington

Step 1: You call us at (412) 895-2157 or fill out our contact form. We schedule a free on-site assessment at your Washington property. We inspect the roof, check for leaks, look at the attic and flashing, and talk with you about what you want. We then provide a written estimate with clear pricing and options, whether you need a repair or a full replacement.

Step 2: Once you approve, we pull the required permits from the City of Washington or the appropriate jurisdiction. We schedule the work and order materials. On installation day, our crew arrives on time, protects your landscaping, and works efficiently. If your home is in a historic district or HOA, we coordinate any design review ahead of time so there are no surprises. We also handle tight lot access by staging materials carefully and using equipment that fits the space.

Step 3: After the work is done, we clean up thoroughly. We remove all old materials, sweep the driveway and gutters, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and you have confidence in the new roof.

Pricing for metal roofing in Washington depends on the size of your roof, the material you choose, access, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer coating and painting from $2.50 per square foot, and snow guards from $1,200. For a free estimate tailored to your Washington home, call (412) 895-2157. We will give you a clear, no-pressure quote.

My home near Washington Park has an old slate roof that is failing. Can you replace it with metal and keep the historic look?
Yes. Many homes around Washington Park and the historic district have slate roofs that are past their prime. We can install metal shingle or standing seam roofing that mimics the look of slate while giving you the durability and low maintenance of metal. We also handle any historic district design review if your home is in a designated area.
A storm just blew through Washington and lifted some panels on my roof. How fast can you respond?
We offer free inspections for storm and wind damage. Call us at (412) 895-2157 and we will schedule a prompt assessment. We can often provide temporary repairs to prevent further damage and then give you a full estimate for permanent repairs or replacement.
What does a typical metal roof replacement cost in Washington, PA?
Most full replacements in Washington run between $9 and $12 per square foot depending on the material and complexity. For a 1,500 square foot roof, that is roughly $13,500 to $18,000. Factors like steep pitch, multiple gables, and difficult access can affect the price. We provide a detailed written estimate after a free inspection.
Do I need a permit to replace my roof in Washington?
Yes, a roofing permit is typically required for a full replacement in the City of Washington and surrounding townships. Requirements vary by jurisdiction, so we always verify with the local building department before starting work. We handle the permit application process for you.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can review your property lines and drainage plan during the estimate. We will make sure gutters and downspouts are directed appropriately and that the roof does not create new water flow onto a neighbor's property. If you are in an HOA, we can also help you get approval for the roof style and color.
Are you fully insured for work on my Washington home?
Yes. We carry general liability insurance and workers' compensation coverage for all our employees.
What maintenance does a metal roof need in Washington's climate?
Metal roofs are low maintenance, but in our area you should have the roof inspected annually, especially after winter. Clear leaves and debris from valleys and gutters, check fasteners for tightness, and look for any signs of ice damming. We offer inspection and maintenance services to keep your roof in good shape.
Why choose us?

Trusted professionals in Pittsburgh

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Pittsburgh

All your work handled by qualified professionals in Pittsburgh

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

251+ Verified Client Reviews in Pittsburgh

⭐⭐⭐⭐⭐ 4.9/5 · 251 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Pittsburgh · Response within 24h · No commitment · ☎ (412) 895-2157

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Pittsburgh ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm